All Principal Publications and Presentations

 

 

Principal Publications and Presentations :

 1- Name:  Dr. Hussain J. Al-Alkawi

 

1-  Al-Alkawi; H. J.Thabat M. Ali, Abdul Muhassan, KiffayaAlsffar (Influence of carbon content on elevated temperature fatigue properties of different steel alloys) J. of Eng. and Technology, 2012.

2- Laser Surface Coating Fatigue Interaction of 2017A-T 3 Aluminum Alloy.No.3644,19May2016.

3- Constant Fatigue Life Under Laser Shot Peening using Different Surface coating.No.1453,27July 2015.

4-  Effect of Plasma Shot Peening on Mechanical Properties and Fatigue Life of  Al-Alloys 2024-T3,6061-T6 and 7075-T6.in 2016

5-  Dynamic Puckling Behavior for 304 stainless steel Colum using Electrical Laser Alarm System, No.1087, 5, June 2016.

6-  Effect of Prior Corrosion on Fatigue Life of Steel Alloy CK35 under Constant Loading, Eng.and Tech. J. No. 33 Part A .No.5,2015.

7-    A Cumulative Damage Model for Fatigue Life Prediction based on Dynamic and Static Deflections. Eng. And Tech. J. No. 33 Part A, No.4.2015.

8-    A new Cumulative Damage Model for Fatigue Life Prediction under shot peening treatment Al-Khawarizmi, Eng., J., Vol. 10,No,2,PP.57-64(2015).

9_   Interaction of corrosion Cumulative Fatigue and Shot Peening of 1100-H12 Aluminum Alloy Al-Khawarizmi,Eng. J. Vol. 11, No.1, PP. 65-72.2015.

10-  7049 Al-Alloy Fatigue Behavior under black Paint Laser Peening” SUSTJ.Of Eng. And computer Science,GECS, Vol .17,No.2,2016.

11-   Effeect of Plasma Peening on Mechanical Properties and fatigue life of AA2024-T3, AA6061 and 7075-T6 (International Conference on Technologies and Materials for Renewable Energy , Environment and Sustainability ,TMREES15.May2015.

12-   The effect of Laser Shot Peening on Mechanical Properties and Fatigue Life of Alloys 2024,T3,6061-T6 7075-T6n, International Scientific Committee for shoot Peening ICSP-12,Goslar, Germany,Sep.15-18,2015.

  13-   Effect of Plasma shot Peening on Mechanical Properties and Fatigue Life of Al-Alloy7075-T6the International Scientific Committee 20-12/May/2015, Iraq Babylon –Hilla –University of Babylon.

14-     Effect of Plasma Shot Peening on Mechanical Properties and Fatigue Life of Alloy 2024-T3n , Engineering Journal /College of Engineering –University of Baghdad ,2015.

15-   Effect of Peening on Mechanical properties and Fatigue Life of Alloy 6061-T6Engineering and Technology Journal University of Technology,2015.

 

 

 

2- Name: Dr. Khallel Ibrahim Mahmoud

1- Khallel I Mahmoud , Zainab K. Hantoosh& Muslih Abdullah,” Practical Application For Designing Quality House ( Case Study) “ J.of Engineering- Collage of Engineering University of Baghdad. Vol.28, No.16, 2011.

2- Khallel I Mahmoud “ Practical Application for Quality Management Documentation- ISO 9001 According to ISO 10013” first edition , University of Technology – Iraq,  Baghdad 2013.

 

 

3- Name: Prof. Dr. FARAG MAHEL MOHAMMED

  • Farag Mahel Mohammed, “Wind tunnel investigation for the effect of (plain flap/ wing) area ratio on the stalling angle of attack”, Jor. Of the Military Collage of Engineering, No. 20, 2000.

 

  • Kamil Ismail Mahmoud and Farag Mahel Mohammed “Experimental verification of lift coefficient and stalling angle of NACA 0015 airfoil with multi slotted and split flaps”, 3rd Eng. Scientific conference of Military Collage of Engineering, April 2000.

 

  • Farag Mahel Mohammed, “Surface roughness effect on the dynamic stall of a rotary wing section in subsonic flow”, 10th Scientific conference of Al-Rafidan University College for Engineers, No. 22, 2008.

 

  • Abdullatif Allhaiby and Farag Mahel Mohammed, “Influence of Performance Parameters on the Design and Development of a Centrifugal Compressor Impeller”, Jor. of Al-Rafidan University College for Engineers, 2006.

 

  • Farag Mahel Mohammed and Yahya A. Faraj, "Tail plane design for satisfying longitudinal handling qualities", Anbar Journal for Engineering Sciences, Vol. 1, No. 2, 2008.

 

  • Farag Mahel Mohammed, Assifa M. Mohamad and Dunia Hurmez, "Influence of cut out way on the elastic-plastic behavior of AL-Cu alloy", Eng. & Tech. Journal, Vol. 28, No. 15, 2010.

 

  • Ahmed N. Al-khazraji, Farag Mahel Mohammed, Eng. Riyadh A. Al-Taie, " Residual Stress effect on Fatigue Behavior of 2024- Aluminum alloy", Eng. & Tech. Journal, Vol. 29, No. 3, 2011.

 

  • Farag Mahel Mohammed and Drai A. Smait, " Mechanical and tribological behavior of glass-polyester composite system under graphite filler content", Eng. & Tech. Journal, Vol. 30, No. 4, 2012.

 

  • Farag Mahel Mohammed, Khalid Mershed A. and Sinan Zuhair Sabri , "Aluminum filler content effect on the dynamic behavior of sandwich panel subjected to impact load". Eng. & Tech. Journal, Vol. 31, No.14, 2013.

 

  • Farag Mahel Mohammed, Khalid Mershed A. and Sinan Zuhair Sabri , " Effect of graphite content on the dynamic behavior of sandwich panel under low velocity impact". Engineering and development Journal, vol. 19, No. 1, 2015.

 

  • Ahmed N. Al-Khazaraji, Farag Mahel Mohammed and Mustafa Baqir Hunain, "Effect of fiber-reinforced type on the dynamic behavior of composite plate". International Journal of Scientific & Engineering Research, Volume 4, Issue 9, September-2013

 

  • Ahmed N. Al-Khazaraji, Farag Mahel mohammed and Mustafa Baqir Hunain, "Influence of Low Temperature on the Dynamic Response of Laminated Composite Material Subjected to Impact Load". International Journal of Current Engineering and Technology, Vol.3, No.3, August 2013.

 

  • Drai A. Smait, Farag Mahel Mohammed and Hussam Lefta Alwan, " Application of Taguchi approache to study the Effect of filler type on tribological behavior of polymer composite under dry conditions", Eng. & Tech. Journal, vol.32, part (A), No. 8, 2014.

 

  • Farag Mahel Mohammed, Drai A. Smait and Hussam Lefta Alwan, " Investigation of graphite filler content effect on the composite behavior subjected to impact load using Taguchi approach”, Wulfenia journal Vol. 21, No. 12, Dec. 2014

 

  • Ahmed N. Al-Khazaraji, Farag Mahel Mohammed and Mustafa Baqir Hunain, " Dynamic behavior investigation of laminate composite plate”, The Iraqi journal for mechanical and materials engineering.

 

  • Farag Mahel Mohammed, Sameir A. Aziez and Huda Naji Abdul-Rihda, “Comparison between Wavelet and Radial Basis Function Neural Networks for DGPS Prediction”, Engineering and Technology Journal.

 

  • Farag Mahel Mohammed, Jamal Abdul-Kareem Mohammed and Mustafa Abdul-Sattar Jabbar” Energy Saving and Performance Improvement of a Split Air Conditioning System Using Water Mist PID Controller” Wulfenia journal 22, No. 9, Sep 2015.
  • Farag Mahel Mohammed, Jamal Abdul-Kareem Mohammed and Mustafa Abdul-Sattar Jabbar” Using Smart Control System to Enhancement the Split Air Conditioning System Performance” Al-Khwarizmi Engineering Journal, 2016.

 

  • Farag Mahel Mohammed,” Mechanical properties investigation of composite material under different parameters variations”, Al-Khwarizmi Engineering Journal, 2016.

 

 4- Name:  Muhannad Zaidan Khalifa

 1- Mechanical Properties Comparison of Four Models, Failure Theories Study and Estimation of Thermal Expansion Coefficients for Artificial E-glass Polyester Composite, Engineering &Technology Journal,Vol.29, No.2, 2011.

2-The Dynamic Coefficients and Elastic Deformation with Thermal Effect For Cylindrical Pivot Tilting 5-Pad Bearing. Engineering &Technology Journal,Vol.27, No.15, 2009.

3- Theoretical Analyses of the Dynamic Behaviour of Composite Cantilever Beam Manufactured From   E-glass Polyester.Engineering &Technology Journal,Vol.27, No.9, 2009.

4- The Effects of Bearing Dimensions and Adjustable Mechanism Position for Six Pads Bearing under Dynamic Load.Engineering &Technology Journal,Vol.27, No.3, 2009.

5-Fatigue Study of E-glass Fiber Reinforced Polyester Composite under Fully Reversed Loading and Spectrum Loading.Engineering &TechnologyJournal,Vol.26, No.10, 2008.

6- Dynamically Loaded Analysis of The Adjustable Hydrodynamic Pads Bearing.Engineering &Technology Journal,Vol.26, No.8, 2008.

7-Critical Speed of Hyperbolic Disks and Eccentricity Effects on The Stability of The  Rotor Bearing System.Engineering &Technology Journal,Vol.25, No.8, 2007.

8-The Effect of Chemical Treatment By Precipitation Mechanism on The Enhancement of The Mechanical Properties And Fatigue Behavior For Duralumin 7075-T6 By Artificial Ageing.Anbar Journal for Engineering Sciences,AJES-2013, Vol.6, No.1

9-Enhancement of Wind Turbine Performance Using Air- Blowing Technique by Modified Strong Implicit Procedure(MSIP) Optimization Solver Method.Eng. & Tech. Journal ,Vol.32, Part (A), No.6, 2014.

  1. Evaluation The Mechanical Properties of CK35 Steel Surface Hardened By ND: YAG Laser,

11-Wear Behavior of An Aluminum Alloys using ND:YAG Laser Treatment.(Accepted For Publication In The Thi-Qar University Journal for Engineering Sciences, no.1251 in 24-5-2015)

   12- Optimize Path Planning for  Medical Robot  in Iraqi Hospitals, Eng. & Tech. Journal ,Vol.33, Part (A), No.4, 2015.

13-Improving The Mechanical Properties Of CK35 Steel using ND:YAG Laser Surface Hardening . (AcceptedFor Publication In The Engineering And Development Journal, No.941,2-2-2016).

 

14- Pore Formation During Sintering of Two Different Composites Materials(Fe-Cu)&(Fe-Cu-C) and Its Effects On Wear Behavior. (Accepted For Publication In The Engineering And Development Journal, 2016)

 

 

5- Name: Abdullah Hassan Abdullah

  • RBFNN Model for Predicting Nonlinear Response of Uniformly Loaded Paddle Cantilever. American Journal of Applied ISSN 1546-9239      © 2009 Science Publications

 

  • Support Vector Machine based Approach for State Estimation of Iraqi super Grid Network. IEEE 2008

 

 

 6- Name: Dr.Abdul Jabbar owaid Hanfesh

1 - "Energy Saving Using Intelligent Controller Based on Fuzzy Logic Control" Eng. & Tech. Journal, Vo.30, No.6, 2012.

 

2 - "A Novel Initial Rotor-Position Estimation Method for Switched Reluctance Motors Based on Frequency Measurement." Eng. & Tech. Journal, Vo.30, No.4, 2012.

 

3 - "A Practical Drive System with Accurate Rotor Position Detection Method for A Switched Reluctance Motor",AJSE,VOL.1- NO.38,2013.

 

 

7-Name: Dr. Mohammed Hassan Jabal

 

  • Mohammed Hassan Jabal, Farid Nasir Ani and S. Syahrullail, (2015), Tribological Features Of Refined, Deodorized And Bleached Palm Olein With Mineral Oil Blend, Journal of Tribology Transactions.( IF= 1.349).
  • Mohammed Hassan Jabal, Farid Nasir Ani and S. Syahrullail, (2016), Tribological Performance Evaluation of Jatropha Oil Blends, Journal of Industrial Lubrication and Tribology.( IF= 0.444).
  • Mohammed Hassan Jabal, Farid Nasir Ani and S. Syahrullail, (2016), Tribological Performance Evaluation of RBD Palm Olein Blends, Journal of Oil Palm Research. (IF= 0.321).
  • Mohammed Hassan Jabal, Farid Nasir Ani and S. Syahrullail, (2016), The Tribological Characteristics of RBD Palm Olein With Jatropha Oil Blend Using Four-Ball Tribotester With Different Normal Loads, Applied Mechanics and Materials, 819: 499-503.
  • Mohammed Hassan Jabal, Farid Nasir Ani and S. Syahrullail, (2016), The Tribological Characteristics of The Cactus And Mineral Base Oil Blends Using Four-Ball Tribotester, Jurnal Teknologi (Sciences & Engineering).
  • Mohammed Hassan Jabal, Farid Nasir Ani and S. Syahrullail, (2016), Tribological Evaluation of Cactus With Mineral Oil Blend Using Four-Ball Tribotester With Different Normal Loads, Jurnal Teknologi (Sciences & Engineering).
  • Mohammed Hassan Jabal, Farid Nasir Ani and S. Syahrullail, (2015), The Tribological Characteristics of Castor Oil with Mineral Oil Blends, Jurnal Teknologi (Sciences & Engineering).
  • Mohammed Hassan Jabal, Farid Nasir Ani and S. Syahrullail, (2014), The Tribologi Characteristic of The Blend of RBD Palm Olein With Mineral Oil Using Four-Ball Tribotester, Jurnal Teknologi (Sciences & Engineering), 69(6): 11-14.
  • Ibtisam Ahmed Hassan, Mohammed Hassan Jabal and Amir Abd Jadou, (2011), Performance Changes For Window Type Air-Conditioner Unit Chemically Treated To Work In An Industrial Petrochemical Environment, Engineering & Technology Journal, 29(9): 430-447.
  • Mohammed Hassan Jabal , (2009), Performance and Design Changes Accompanying the Replacing of an Old Cooling fluid(R12) with One which is Safe on the Ozone Layer ( R134a) in the Cooling System of a Small Water Cooler, Engineering & Technology Journal, 27(11).
  • Ibtisam Ahmed Hassan, Amir Abd Jadou and Mohammed Hassan Jabal, (2011), Experimental Study for a Natural Convection Heat Transfer from an Isothermal Heated Rectangular plate, Journal of Engineering, 17(1):1-17.

 

 

8- Name: Ali Hussain Ali Saeed

 

1-        Computer Aided Drawing, Asst. Prof. Ali Hussain Ali Saeed,UOT,2011.

 

 

9- Name: Assist.Prof. Dr.Raheek I. Ibrahim

  •  
  • I. Mohammed, R. I. Ibrahim, L. Hussien, N. Manueel, A. Sameer, "Characteristics of carbon nanospheres prepared from locally deoiled asphalt", Adv. Mat. Sci. Eng., Vol. 2013, Jun. 2013.
  • I. Ibrahim, "Reduction of chemical effects of swelling and shrinkage phenomena on a boiler in steam power plant using silicon antifoam", Eng. & Tech. Journal, Vol.31, Part(A), No.15, 2013.
  • I. Ibrahim, Q. A. Aljabar, K. Assi, "Study the condensation temperature effect on crystallization phenomena and performance for absorption cooling system working by solar energy", Babil Univ. Sci. J, Vol. 21, No. 3, 2013.
  • F. Alsalhy, R.I. Ibrahim, H. Alaa, "Experimental Investigation and Optimization of air sparging on hollow fiber membrane performance", American  Jou. Chem. Eng.,Vol.1,  No.1, 2014.
  • I. Ibrahim, A. W. Mohammad, Z. H. Wong, "Optimization and Performance evaluation of nutrient removal from palm oil mill effluent wastewater using microalgae", IOP Conf. Series: Materials Science and Engineering Vol. 78, No. 012006, doi:10.1088/1757-899X/78/1/012006, 2015.
  • I. Ibrahim, A. W. Mohammad, Z. H. Wong, "Optimization and treatment of POME using microalgae and Ultrafiltration membrane", Membrane Water Treatment Journal Vol. 6, No. 4, 2015.
  •    J. Saleh, R. I. Ibrahim, A. D. Salman, "Characterization of Silica nanoparticles prepared from locally silica sand and its application in cement mortar using Optimization technique", (http://dx.doi.org/10.1016/j.apt.2015.05.008) Adv. Powder Tech. Jou., Vol. 26, No.4, 2015.
  • J. Saleh, R. I. Ibrahim, A. D. Salman, "Optimization process for using prepared Nanosilica in concrete", Proceeding of BCEE2, 65-72, 2015.
  • J. Mohammed, R.I. Ibrahim, "Remediation of Cu (II) from Wells Water of Iraq by Using Cortex of Fruits and Agricultural Waste", Arabian Journal of Science and Engineering, Vol. 41, 2016.
  • I. Ibrahim, "Upgrading of Al-Rustamiyah sewage treatment plant through experimental and theortical analysis of membrane fouling", Accepted for publication in Iraqi Journal of Chemical and Petroleum Engineering, January 2017.
  • I. Ibrahim, M. K. Aodah, "Viscosity Reduction for Flowability Enhancement in Iraqi Crude Oil Pipelines Using Novel Capacitor and Locally Prepared Nanosilica", Accepted for publication in Journal of Petroleum Science and Engineering, April 2017.

 

 

10-Name:Prof. Dr. Saadi Turied Kurdi

 

  • Saadi Turied Kurdi and Nihad Muhmed Ameen, “D.C. Servo Position Control Parameter Estimation”, Scientific Journal Published by university of Technology, Vol. 28,No.5,2010.

 

  • Saadi Turied Kurdi and Maan Younus AbdullahFarag “Weighting For Mobile Ad Hoc Networks Clustering Based On K-HPSO And Its Application In Aircraft Networks”, Journal of Babylon University, VOL.22,No.4,2014.

 

  • Saadi Turied Kurdi, “Efficiency Improvement of Inertial Navigation System (INS) Based On Artificial Neural Network ANN)”, Journal of Babylon University.2011.

 

  • Ali Kamal Shaykhli, Saadi Turied Kurdi and Ali Sachat Zubeyedi, "Calculation of Electrical Components for Induction Cookers ", Anbar Journal for Engineering Sciences, Vol. 1, No. 2, 2014.
  • Fikret Abdul Kareem,Saadi Turied Kurdi,and Wameed Bahaa Aldin ," Harding Technique as a tool of Electromagnetic Pulse Threat ",Journal of Engineering and Technology of Panjab University, Journal is publishing internally in University and affiliated colleges.2012.
  • Saadi Turied Kurdi, “The basics of electricity and Instrument of the aircraft ".The first Edition, 2013.
  • Saadi Turied Kurdi, Hassan Abad al-wahab Anial, Hussein Ahmed Abd Yaqoob," Experimental and Theoretical study for the effect of Diesel Fuel Quality Produced in Iraq on Ignition Delay Period "International Journal of Engineering and Advanced Technology (IJEAT), ISSN: 2249 – 8958, Volume-X, Issue-X, don’t delete Top & Bottom Header, Manuscript details (Ist Page, Bottom, Left Side) 2016.

 

 

 11- Name: Assist.Prof. Dr.Hatam Kareem Kadhom Aldafai

 

-Three-Dimensional Analysis of Extrusion in Complex Die by Using Upper Bound Theory \EEng. &Tech. Journal, Vol.29, No.4, 2011.

-Mechanical Properties For Pipes Made From Composite Materials (Glass/ Epoxy And Carbon/ Epoxy) Subjected To Internal Pressure \ مجلة الهندسة والتكنولوجية, المجلد 30, العدد 6, 2012

-"Studying The Effect Of Temperature On The Diffusionof Alkaline Solution In Polyester Reinforcement By Fibersglass",The Iraqi Journal For Mechanical And Material Engineering, Vol.13, No4, 2013

-Determination Of Radial Cutting Forces During Drilling Scientific journal of construction Vol. No. 1/75,pp:152-156 Issue in Kharkov 2014.

-Numerical Analysis of Elastic Stress Due to Internal Pressure in Elbow Pipe

Elixir Mech. Engg. 83 (2015) 32968-32972

-Dr.HatamK. Kadhom2:, Studying The Effect Of Temperature On The Diffusionof Alkaline Solution In Polyester Reinforcement By Fibersglass"., The Iraqi Journal For Mechanical And Material Engineering, Vol.13, No4, 2013

-Dr.HatamK. Kadhom2", Suggestion RBFNN model for thick composite laminated plates analysis "

3457 ,16/8/2015

-Dr. Hatam Kareem Kadhom ", Construction of low –rise residential system", Vol. 30 (no 10, Year 2015)of" Ciencia e Tecnica     Vitivinicola" journal (ISSN :0254-0223).(ISI Thomson Reuters Impact factor : 0.479

-Dr.Hatam Kareem Kadhom ", DETERMINATION OF RADIAL CUTTING FORCES DURING DRILLING", Vol. 30 (no 11, Year 2015)of" Ciencia e Tecnica Vitivinicola" journal (ISSN :0254-0223).(ISI Thomson Reuters Impact factor : 0.479

 

 

 12- Name: Dr.Salam WaleyShneen

 

  1. Salam WaleyShneen, Chengxiong Mao “Artificial Optimal Fuzzy Control Strategy for Elevator Drive System by Using Permanent Magnet Synchronous Motor” TELKOMNIKA Indonesian Journal of Electrical Engineering, Vol. 14, No. 3, June 2015, pp. 470 ~ 480.
  2. Salam WaleyShneen, Chengxiong MaoNasseer K. Bachache “Biogeography Based Optimization for Tuning FLC Controller of PMSM” Springer International Publishing Switzerland 2015 Y. Tan et al. (Eds.): ICSI-CCI 2015, Part I, LNCS 9140, pp. 395–402, 2015.
  3. Salam WaleyShneen, Chengxiong MaoNasseer K. Bachache” Biogeography Based Optimization Tuned Fuzzy Logic Controller to Adjust Speed of Electric Vehicle” TELKOMNIKA Indonesian Journal of Electrical Engineering, Vol 16, No.3, Dec.2015.
  4. Salam WaleyShneen, Chengxiong Mao, Dan Wang.”Advanced Optimal PSO,Fuzzy&PI Controller With PMSM &WTGS At 5Hz Side Of Generation and 50Hz Side Of Grid”International Journal of Power Electronics and Drive System (IJPEDS)- 2016, 7(1).
  5. Salam WaleyShneen, Chengxiong Mao, Dan Wang “Artificial Optimal Fuzzy Control Strategy for Electric Vehicle Drive System by Using Permanent Magnet Synchronous Motor” International Journal of Engineering and Technology (IJET) , 2017, 9(1).
  6. Salam WaleyShneen“Advanced Optimal for PV system coupled with PMSM” Indonesian Journal of Electrical Engineering and Computer Science, 2016, 1(3).
  7. Salam WaleyShneen“Power-Electronic Systems for the Grid Integration of Energy Sources” Indonesian Journal of Electrical Engineering and Computer Science, 2016, 1(3).
  8. Adnan JabbarAttiya, Yang Wenyu ,Salam WaleyShneen” Fuzzy-PID Controller of Robotic Grinding Force Servo System”TELKOMNIKA Indonesian Journal of Electrical Engineering, 15, No. 1, July 2015, pp. 87 ~ 99
  9. Adnan JabbarAttiya, Yang Wenyu ,Salam WaleyShneen” PSO_PI Controller of Robotic Grinding Force Servo System”TELKOMNIKA Indonesian Journal of Electrical Engineering, 15, No. 3, September 2015, pp. 515 ~ 525.
  10. Adnan JabbarAttiya, Yang Wenyu , Salam WaleyShneen” Compared with PI, Fuzzy-PI and PSO-PI Controllers of Robotic Grinding Force Servo System”TELKOMNIKA Indonesian Journal of Electrical Engineering, 16, No. 1, October 2015, pp. 65 ~ 74.

11.Salah H. Abbdal, Thair A. Kadhim, Zaid Ameen Abduljabbar, Zaid AlaaHussien, Ali A. Yassin, Mohammed Abdulridha HussainSalam Waley"Ensuring Data Integrity Scheme Based on Digital Signature and Iris Features in Cloud"Indonesian Journal of Electrical Engineering and Computer Science, Vol 2, No 2: May 2016

12.Adnan JabbarAttiya, Salam WaleyShneenBasma Abdullah Abbas, Yang Wenyu"Variable Speed Control Using Fuzzy-PID Controller for Two-phase Hybrid Stepping Motor in Robotic Grinding"Indonesian Journal of Electrical Engineering and Computer Science, Vol 3, No 1: July 2016

 

 

 13- Name: Nidhal Y. Nasser

1- Nidhal Y. Nasser,” Design and Implementation of PIR- Array to Reduce PowerConsumption for Iraq’s Households”, Journal of Babylon University, Ref. 4, 4 Jan. 2016.

 

2- Nidhal Y. Nasser, “Analysis and Evaluation Of power Line EMI Filter in Its “Worst – Case” of Operation Based onChain Parameters”, Punjab university, India,2013.

3- Nidhal Y. Nasser, “Practical Approach in Designing Conducted EMI Filter to Mitigate Common Mode and Differential Mode Noises in SMPS”, Journal of Engineering and Development, Vol. 16, No.1, March 2012. Iraq.

4Dr. Miqdad Y. Thanon&Nidhal Y. Nasser, "Over Voltage Transient Protection Network Design". Eng. & Tech. Journal, Vol. 27, No.15, 2009.

 

 

15- Name: Assist.Prof. Dr.Hayder Shamsi Hassan

1-Attitudes toward academic specialties andits  relationship to academic achievement motivated with students the Department ofElectromechanical Engineering at the University of Technology. journal of the Iraqi Assocition for Educatiuon and psyghologyscinces. No99 -2013 . Baghdad - Iraq.

2- The obstacles of scientific research from view sight staff members in the Department ofElectromechanical Engineering  in University of Technology .journal of the college ofbasic education .vol.20. no84 -2014 .Al-Mustansiriyah University. Baghdad- Iraq.

3- Levels of geometric thinking with the students of the Department of Mathematics in the College of Education/ Ibn- ALHaitham by the University of Baghdad .journal of theAl- Ustath. .vol.2 .no 214.College of Education for human scinces- Ibn Rushhd .University of Baghdad. Baghdad -Iraq

 

 16- Name: Assist.Prof. Dr.Khansaa Dawood Salman

 

 

 17- Name: Dina H. Shaker

1-Effect of magnetic field on some bacteria, Al-Anbar Journal of Agricultural science Vol.9, No.1, 2011.

2-A Modification on rivest cipher (RC4) algorithm against FMS wired equivalent privacy (WEP) attack. Al-Mansour Journal, Iraq-Baghdad, Vol. 20, 2013.

3-The Management of the ATM networks cell multiplexing using Neuro-Fuzzy controller ,Diyala Journal of Engineering sciences, Iraq, 2013.

4-Metamaterial structures on micro strip LPFs. Al-Pensee Multidisciplinary Journal, Paris-France, Vol. 75, issue. 11,2013.

 

 18- Name: Enas Mozahim Abed

* A.S.Azharsabah ,''poisson's ratio as a function of time in composite material of viscolastic behavior by depending on creep test', Engineering and technology journal, vol.29,no.3,2011.

  • Read NaeemHwyyin ,Lact. Azhar Sabah Ameed and Dr.Hatam Karim Kadhim ,"Three-dimensional Analysis of Extrusion in Complex Die by using Upper   Bound Theory", Engineering and technology journal, 2010.
  • Read NaeemHwyyin, Lect. AzharSabahAmeed and Ass. Prof. Zainab K. Hantoosh," Three Dimensional Analysis of Thermal Stress and Strain in Composite Exhaust Tube Model at Different Salt Concentration Ratios", Iraqi Journal for Mechanical and Material Engineering, Vol.31, No.8, 2013.

 

 

 19- Name: Assist.Prof. Dr.Shireen F. Abdul karim Al-Saegh

 

  Al-Saegh, Shireen F., Alalkawi, Hussain J.M., Abdul-ridha, Haneen F.,“ Experimental Investigation for Some Mechanical Properties of Aluminum Matrix Ccomposites Reinforced by  AL2ONano-Particles ”. Eng. And Technology Journal.

 

 

 

 

20- Name: Dr.Aseel Abdulbaky. Abdulrazak.Alhamdany

 

  • “Evaluation of Academic Staff in Iraqi's University Education and Psychological Association in Baghdad in2000.
  • Vibration Modeling for Turbine Rotating Assembly of Turbo Charger by finite element method / Engineering and technology in Baghdad in 2001.
  • A model for prediction Hardness Using Neural Network. Submitted in conference in Erbil, 2011.
  • Prediction of Fracture Toughness Using Neural Network,2012
  • A Model for the Prediction of Fracture Toughness Using Neural Network. http://uotechnology.edu.iq/tec_magaz/index.htm
  • Estimation of the Fracture Toughness of Tempered Nanostructured Bainitehttp://www.msm.cam.ac.uk/phase-trans/ 2012/ fracture.html
  • Estimation of the Volume Percent of Normal and Nanostructured Bainite in Bainitc Steels. Materials Today: Proceedings:2015.
  • Fatigue model of bearing steel based on stressed volume, 2016.
  • Mathematical model design to predict the fatigue life behaviour for bearing steels. 2016.
  • Strength and toughness of clean nanostructured bainite. 2017.

 

  1. Conferences at the University of Cambridge/ Department of Material Sciences and Metallurgy (Armourers and Brasiers' Cambridge Forum) in 2009 and 2010.
  2. More than 30 conferences inside Iraq from 2010 to 2016.
  3. International conference the joint 3rd UK-China Steel Research Forum & 15th

Chinese Materials Association-UK on Materials Science and Engineering in 2014.

  1. Conferences at the University of Cambridge/ Department of Material Sciences and

Metallurgy (Armourers and Brasiers' Cambridge Forum) in 2014.

 

21-  Name:  Assi. Prof. ASIFA MAHDE MOHAMAD

 

 

 

 22- Name: Assist.Prof. Dr.Enaam O. Hussoun

 

1- Dr. Khansaa D. Salman, Dr. EnaamO.Hasuon, Asaad K. Hamza ,"Effect of Laser Surface Treatment on Some Mechanical Properties of Low Carbon Steel", Engineering and Technology Journal, Vol.30.No.12, 2012.

2-  Dr. Khansaa D. Salman ,Dr. EnaamO.Hasuon , DuniaHermezEsckndar  ,"Effect of Laser Surface Treatment on the Properties of

Composite Material Produced by Powder Technology", Engineering and Technology Journal, Vol.31.PART (A) .No.10, 2013.

3- Dr. EnaamO.Hasuon ,"Effect of Quenching Media on wear resistance of AISI 52100 bearing steel Alloy", Engineering and Technology Journal, Vol.31part(A).No.14, 2013

4- Dr. Enaam O. Hasuon , Dr.Hussain Abdulaziz Abrahem" A variation method in simulation of the slow moving concentrated mass on truss structure.

 

 

23- Name:  Shath akarim baqir

 

  • Shatha k. Baqir,”Performance Analysis of Three Phase Cascaded Multi-level

       Inverter (CMLI) for Induction Motor Drives”,Journal of Engineering and

technology ,Vol. 31, part (A), No.13, 2013 .

  • Shatha k. Baqir,”A Proposed Technique For Harmonic Reduction Of Three

       Phase Cascade Multilevel Inverter (Cmli)”,Journal of Engineering and Development, Vol. 17, No.5, 

        November 2013 , ISSN 1813- 7822.

  • Shatha k. Baqir&others ,industrial sciences,2nd year textbook for electronic specialty ,ministry of education ,general directorate of vocational education ,Iraq,2012.
  • Shatha k. Baqir&others ,industrial drawing,2nd year textbook for electronic specialty ,ministry of education ,general directorate of vocational education ,Iraq,2012.
  • Shatha k. Baqir& others , practical training ,2nd year textbook for electronic specialty ,ministry of education ,general directorate of vocational education ,Iraq,2012
  • Shatha k. Baqir&others ,industrial sciences,3rd year textbook for electronic& control specialty ,ministry of education ,general directorate of vocational education ,Iraq,2013.
  • Shatha k. Baqir&others , industrial drawing ,3rd year textbook for electronic& control specialty ,ministry of education ,general directorate of vocational education ,Iraq,2013.
  • Shatha k. Baqir&others , practical training ,3rd year textbook for electronic& control specialty ,ministry of education ,general directorate of vocational education ,Iraq,2013.

 

 

 24- Name: Dr.Mohammed Jawad Mohammed

Mohammed, M. J. and Mat Darus, I. Z. (2014). PID Controller for NARX and ANFIS Models of Marine Pipe Cylinder Undergoes Vortex Induced Vibration. Journal of Theoretical and Applied Information Technology. 66(1), 259-267. (Scopus).

Mohammed, M. J. and Mat Darus, I. Z. (2014). Active Vortex Induced Vibration Controller And Neuro Identification For Marine Risers. Journal of Theoretical and Applied Information Technology. 70(1), 153-162 (Scopus).

Mohammed, M. J. and Mat Darus, I. Z. (2014). Fuzzy-PID Controller on ANFIS, NN-NARX and NN-NAR System Identification Models for Cylinder Undergoes Vortex Induced Vibration. Journal of Vibroengineering. 16(7), 3184-3196 (Scopus / ISI / IF 0.66).

Mohammed, M. J. and Mat Darus, I. Z. (2014). Nonlinear System Identification of Vortex Induced Vibration on Pipe Cylinder. Proceedings of the 14th International Conference on Robotics, Control and Manufacturing Technology (ROCOM '14). Kuala Lumpur, April 23-25 2014. 58-65.

Mohammed, M. J. and Mat Darus, I. Z. (2014). System Identification of Pipe Cylinder Behavior Caused By Vortex Induced Vibration. Proceedings of the 14th International Conference on Robotics, Control and Manufacturing Technology (ROCOM '14). Kuala Lumpur, April 23-25 2014. 186-193.

Mohammed, M. J. and Mat Darus, I. Z. (2014). Discrete Time PID Controller on Vortex Induced Vibration for Marine Risers Based on Neural Network System Identification Model. IEEE First International Conference on Systems Informatics, Modelling and Simulation (SIMS 2014). Sheffield, United Kingdom, 29 April – 1 May 2014. 12-17.

Mohammed, M. J. and Mat Darus, I. Z. (2014). PID Controller on Marine Pipe Risers Under Vortex Induced Vibration Based on Adaptive Neuro-Fuzzy Inference System Model. IEEE First International Conference on Systems Informatics, Modelling and Simulation (SIMS 2014). Sheffield, United Kingdom, 29 April – 1 May 2014. 71-75.

 

 25- Name: Assist.Prof. Dr.Jamal A. Mohammed

 

  • A. Mohammed, Ali H. Jabbar and Mohammed K. Edan, Mohammed K. Edan, “ Design and Simulation of Control Circuit for TCSC Based MATLAB Simulink” , Journal of Eng. and Development, Al-Mustansuria University, Vol. 15, No. 4, pp. 106-122, 2011.
  • A. Mohammed, “Modeling, Analysis and Speed Control Design Methods of a DC Motor”, Eng. and Technology, University of Technology, Vol. 29, No. 1, pp. 141-155, 2011.
  • A. Mohammed &AhlamElibi “Design of Software Laboratory Teaching Tool for DC Machine Experiments Using MATLAB / Simulink”, Babylon journal, Babylon University, Vol. 20, No. 1, 2012.
  • A. Mohammed, “Influence of Inverter Switching Conditions on PMBLDC Motor Performance”, Eng. and Technology, University of Technology, Vol. 19, No. 30, pp. 3394-3409, 2012.
  • A. Mohammed, “Pulse Width Modulation DC Motor Control Based on LM324”, Eng. and Technology, University of Technology, Vol. 31 Part (A), No. 10, pp. 1882-1896, 2013.
  • A. Mohammed &AhlamElibi “Modeling of DC Elevator Motor Drive for Mid-rise Building”, Eng. and Technology, University of Technology, Vol. 31 Part (A), No. 12, pp. 2320-2342, 2013.
  • Jamal A. Mohammed, Hatem Kareem, and AthraaSabeeh, “Implementation of an Electro-Pneumatic Prototype Elevator Controlled by PLC”, Eng. and Technology, University of Technology, Vol. 33 Part(A), No.8, 2015, pp. 1986-1998..
  • Farag Mohammed, Jamal A. Mohammed, and Mustafa A. Jabbar, “Using Smart Control System to Enhancement the Split Air Conditioning System Performance

”, Al-Khwarizmi Engineering Journal, Accepted to be published 2016.

Jamal A. Mohammed, “Economical design of H-bridge multilevel inverter drive controlled by modified fast algorithm”, Microelectronics Reliability 65 (2016) 89–97. http://dx.doi.org/10.1016/j.microrel.2016.07.005

 

 

 26- Name: Assist.Prof. Dr.Saad T. Hamidi

 

- Dr. Saad T. Hamidi ,Mohamed A. Fayad “ Theoretical Study for Aerodynamic Performance of Horizontal Axis Wind Turbine”, AL-Tagani , Iraq,Vol.24,No.8 , pp.113-124 , 2011

Dr.Abass Z. Salman , Dr. Saad T. Hamidi,”The Solution of Laminated Composite Spherical Shells by the Application of Chebyshev Series ”, The Iraqi Journal For Mechanical And Material Engineering, Vol.11, No.4, pp.695-708, 2011         

- Dr. Saad T. Hamidi ,Mohamed A. Fayad , “Prediction of Thermal Characteristics for Solar Water Heater”, Anbar Journal for Engineering Sciences, Iraq,Vol.4 ,No.2 , pp.18-32, 2011   

Dr.Ali A. Abdulminaem ,Dr.Saad T. Hamidi, Hussein A. Hadi, ”Experimental study of Performance of Luminescent Concentrator”, Engineering &Technology Journal, Iraq , Vol.30, No.4 ,pp.591-604, 2012

Dr. Abass Z. Salman, Dr. Saad T. Hamidi,” Experimental Study of the Effect of Reflection Mirrors Orientation on the Performance of Solar Still”, Journal of Engineering an d Development, Iraq, Vol. 16, No.4, pp. 337- 348 , 2012

- Dr. Saad T. Hamidi,” An Experimental Verification Under local Climate for Performance Wind Turbine Type DPE (1000 Watt)”, Al-Anbar Journal Engineering,Iraq, Vol.6  No.3  , 2013

-  Dr.Saad T. Hamidi,” Effect of different methods bonding between absorber plate and tubes for flat plat solar collector on efficiency factor”, International renewable energies Conference and their application ,University of Technology , Iraq, pp. 263-274,2013     

- Dr.Saad T. Hamidi, Dr. Ekbal H. Ali  ,Noor  S. Hassan,” Design and implementation of single axis tracker model based on microcontroller for solar collector “ , The Iraqi Journal for Mechanical and Materials Engineering Vol.  ,No. , Babylon University , 2016        

 

27- Name: Dr.Huda Akram Zainal Al-Salihi

  • Fatigue damage accumulation behaviour of 2024 Al-alloy under the effect of shot peening time J. Of Engineering and Technology, 2005.
  • Theoretical and experimental study of buckling phenomena for solid and hollow columns under dynamic loads. Babylon J. for Engineering, 2008.
  • Al-Salihi, H., Bettles, C., Muddle, B., 2010, The ageing Behavior of Titanium alloy Ti-10V-2Fe-3Al, Materials Science Forum, 2 August 2010 to 6 August 2010, Trans Tech Publications, Switzerland, pp. 843-846.
  • Al-Salihi, H., Bettles, C., Muddle, B., 2012, “Flow Behavior and Microstructural Evolution of Titanium Ti-10V-2Fe-3Al Alloy During Hot Compression Test”, 29 May 2012 to 31 May 2012 Cairo, Egypt, 15TH INTERNATIONAL CONFERENCEON APPLIED AND MECHANICAL ENGINEERING AMME-15.

 

28-Name: Dr.Ban M. Mohammed

 

  • Ban, M., Mohammed, “Experimental Analysis of Heat Transfer with Dropwise and Filmwise Condensation on Inclined Double Tubes Heat Exchanger”, Journal of Engineering and Technology, University of Technology/Baghdad /Iraq, 2014.
  • Ban, M., Mohammed, “"Proposed Method for the Development of Power Plants,      " University of Kufa, 2001.

 

 

 29-Name:  Prof. Dr. Hussein Thani Rishag

1- Dr. Hussein Thani Rishag. "Reduction reactive power and collapse voltage using series capacitors compensation in sudden change loads of transmission lines". Engineering and Technology Journal, vol. 30, No.5, P. 897-919. 2012.

2- Dr. Hussein Thani Rishag. "Using power system stabilizers (pss) and shunt static var compensator (svc) for damping oscillations in electrical power system".

AL- Mamoon College Journal, No.17, P.57-71. 2012.

3- Dr. Hussein Thani Rishag, Dr. Ghaidaa. K. Salih "Study the effect of changing climate on efficiency of solar cells (photovolatic)".14 Scientific conference in Al- Mamoon College. 24 April 2013, P123-125.

4- Dr. Hussein Thani Rishag, Dr. Ghaidaa. K. Salih"Improving frequency regulation and exchange power by using automatic pulse switch off load in interconnection power systems".15 Scientific conference in Al- Mamoon College. 23 April 2014, P101-103.

5- Dr. Khalid Faisal Sultan, Dr. Hussein Thani Rishag, Jwan Mohammed Fadhil "Augmentation of Heat Transfer for Spiral Coil Heat Exchanger in Solar Energy Systems By Using Nano fluids". The 5th International Scientific Conference for Nanotechnology and Advanced Materials and Their Applications ICNAMA 2015 (3-4) Nov.2015.

 

 

30- Name: Hashim Abed Hussein

-Hashim, A. H, “Influence of viscosity on the mean velocity of internal flow gasses in a combustion chamber gas generator", Engineering and Technology Journal, Vol.29.No.11, 2011.

- Hashim, A. H, “The dynamic effects of swell and shrink in drum boiler of steam power   plant", ANBAR Journal for engineering science, Vol.5, No.2, 2012.

 - Hashi, - -Hashim, A. H, “Mathematical modeling of hybrid cooling tower for steam power plant ", Engineering and Technology Journal, Vol.30, No.20, 2012.

- Hashim, A. H, “An experimental study to analyze the burning gasses and calculation of the heat losses from steam generator of power plant", The Iraqi Journal for Mechanical and Materials Engineering ,Vol. 13, No.3, 2013.

-Hashim, A. H, “Rapid rise of heat effects on the tubes characteristics in boiler of steam power plant", A L Rafidain Journal, N0.31, 2013

 - Hashim, A. H,“An increasing of the thermal and internal efficiency for steam power plantby using the best economic method", Tikrit Journal of Engineering sciences,Vol.20, No.2,2013.

-Hashim, A. H, “An experimental and theoretical investigation of the dynamic effects of rapid rise in fuel flow rate steam on characteristics of the inner tubes of  steam power plant",International conference for energy applications,  Technology university ,2013.

- Hashim, A. H, “Development of absorption cooling system work by using solar energy", International conference 11th AL Rafidain University, 2013.

-Hashim, A. H, “Simulation of the flat plate solar receiver performance for a single effect absorption cooling system operation", International conference, Industrial Ministry, 2013.

-Hashim, A. H, “An Economic Importance for Using the Flat Plate Solar Receiver in a Single Effect Cooling System Operation", Engineering and Technology Journal, Vol.31, No.11 2013.

-Hashim A. H, Ali H. N., and Abdulmunem R. A.“Improving of the Photovoltaic – thermalsystem performance using the water cooling technique", IOP Publishing Materials Science and Engineering, 78,012020, (2015).

-Hashim A. H., Qusay J., Khalid F. S. “Experimental analysis on thermal efficiency of  evacuated tube solar collector by using nanofluids", International urnal of Sustainable and Green Energy, Vol. 4, No. 16, 2015

 

-Hashim A. H., Ali H. N. and Abdulmunem R. A. “Indoor investigation for improving the hybrid photovoltaic /Thermal system    performance using Nanofluid (AL2O3-Water) ", Engineering and Technology Journal, 2015.

-Hashim A. H., Ali H. N., and Abdulmunem R. A. “Enhance Photovoltaic /Thermal System Performance by Using Nanofluid", IET Journal (Renewable Power Generation)2015

-Hashim A. Hussain, khalid faisal sultan, omar hassan hameed “experimental study of heat transfer enhancement for spiral coil heat exchanger using hybrid nanofluid in solar collector “, wulfenia journal .vol .no. 12Des 2015

 

 

 31- Name: Dr. Majida Khalil Ahmed

 

-The First Iraqi Conference for Electrical and Electronic Engineering, University of Mosul, 12-13 November 2000.

- Evaluation of the accuracy of the performance of generators of DC speed, Journal of Engineering and Technology, No. 1, Volume V, April 2001.

 

 32- Name: Dr.Ameer Abed Jaddoa

 

  1. Catalysts: regeneration using supercritical fluid CO2 extraction process: Monograph Ameer Abed Jaddoa [et al.]; under. ed. by F.M. Gumerov – Kazan: “Brig”, 2015. 264 p.
  2. Regeneration of spent catalyst and impregnation of catalyst by supercritical fluid: Monograph Ameer Abed Jaddoa [and etc.];F.M. Gumerov&B.LeNeindre editors – Nova science publishers, Inc.: New York,2016. 186 P.
  3. Synthesis of the palladium catalyst with the SC-СO2-impregnation method realized in the static mode/ A.A. Zakharov, Ameer Abed Jaddoa, T.R. Bilalov, F.М. Gumerov//Int. J. Analytical Mass Spectrometry and Chromatography. 2014. Vol. 2, No.4, P. 113-122.
  4. Regeneration of Nickel-Molybdenum catalysts DN-3531 and Criterion 514 used in kerosene and gas oil hydrotreating by supercritical carbon dioxide extraction/ Ameer Abed Jaddoa, Timur R. Bilalov, Farid M. Gumerov, FarizanR.Gabitov, B. Le Neindre// Int. J. Analytical Mass Spectrometry and Chromatography. 2015. Vol.3, No.3, P. 37-46.
  5. Some thermodynamic properties of “anthracene – carbon dioxide” mixture in supercritical fluid state / Ameer Abed Jaddoa, Zakharov A.A., Bilalov T.R., Nakipov R.R., Gabitov R., Zaripov Z.I., Gumerov F.M. // Supercritical Fluids: Theory and Practice, 2015 Vol.10, No. 4, pp. 18-35.
  6. Applying a water-repellent coating on the fabric in supercritical carbon dioxide, A.A. Zakharov, Ameer Abed Jaddoa, T.R. Bilalov, F.М. Gumerov/ Supercritical Fluids: Theory and Practice, 2016 Vol.11, No. 2, pp. 39-52.
  7. Supercritical Fluid CO2 extraction regeneration Nickel-Molybdenum Hydrotreating Catalyst/Ameer Abed Jaddoa , T.R. Bilalov , F.M Gumerov, F.R Gabitov, Z.I.Zaripov,R.SYarullin2, AA Pimerzin4, PA Nikulshin/ Kataliz v promyshlennоsti, vol. 16, № 5, 2016, pp 43-50.
  8. Catalyst regeneration using supercritical fluid media / Ameer Abed Jaddoa, Bilalov T.R., Khairutdinov V.F., Gumerov F.M. // Bulletin of Kazan Technological University: 2014. Vol. 17, No. 19, pp. 155-159.
  9. Study of anthracene solubility in pure and modified supercritical carbon dioxide / Ameer Abed Jaddoa, Zakharov A.A., Bilalov T.R., Gumerov F.M.// Bulletin of Kazan Technological University: 2015. Vol. 18, No. 8, pp. 73-76.

10.Description of anthracene solubility in supercritical carbon dioxide using Peng-Robinson equation of state / Ameer Abed Jaddoa, Zakharov A.A., Bilalova L.R., Bilalov T.R.,   Gumerov F.M. // Bulletin of Kazan Technological University: 2015. Vol. 18, No. 8, pp. 136-138.

11., Anthracene isobaric heat capacity at 303 – 613 K at atmospheric pressure / Ameer Abed Jaddoa, Gabitov I.R., Nakipov R.R., Zaripov Z.I. // Bulletin of Kazan Technological University: 2015. Vol. 18, No. 8, pp. 23-25.

  1. Enthalpies of mixing of “Anthracene-SC-СО2” mixtures / Nakipov R.R., Ameer Abed Jaddoa, Gabitov I.R., Zaripov Z.I.// Bulletin of Kazan Technological University: 2015. Vol. 18, No. 8, pp. 37-40.
  2. Regeneration of “DN-3531-Criterion 514” nickel-molybdenum catalyst using supercritical carbon dioxide / Akhmetzyanov T. R., Ameer Abed Jaddoa, YarullinL.Tu., Gumerov F.M. // Bulletin of Kazan Technological University: 2015. Vol. 18, No. 8, pp. 174-176.
  3. Thermogravimetric analysis of the catalysts regenerated in supercritical carbon dioxide / A.Kh. Ibrahim, AmeerAbedJaddoa, Bilalov T.R., Gumerov F.M. // Bulletin of Kazan Technological University: 2015. Vol. 18, No. 12, pp. 5-8.
  4. The study of oxidation of DN-3531 nickel molybdenum catalyst using automated flowing chemisorption analyzer / Ameer Abed Jaddoa, A.Kh. Ibrahim, Burganov B.T., Bilalov T.R., Gumerov F.M. // Bulletin of Kazan Technological University: 2015. Vol. 18, No. 15, pp. 76-78.

 

 

 

 33- Name: Nidhal Y. Nasser

1- NidhalY. Nasser,” Design and Implementation of PIR- Array to Reduce PowerConsumption for Iraq’s Households”, Journal of Babylon University, Ref. 4, 4 Jan. 2016.

 

2- Nidhal Y. Nasser, “Analysis and Evaluation Of power Line EMI Filter in Its “Worst – Case” of Operation Based onChain Parameters”, Punjab university, India,2013.

3- Nidhal Y. Nasser, “Practical Approach in Designing Conducted EMI Filter to Mitigate Common Mode and Differential Mode Noises in SMPS”, Journal of Engineering and Development, Vol. 16, No.1, March 2012. Iraq.

4Dr. Miqdad Y. Thanon & Nidhal Y. Nasser, "Over Voltage Transient Protection Network Design". Eng. & Tech. Journal, Vol. 27, No.15, 2009.

 

 

 

 

 

 

 

5-Name: Adel Ridha Othman

 

1- Damping Inter-Area Electromechanical Oscillation in Two –Area Electrical power System Using Power System Stabilizer. Journal of Engineering and Development, Vol. 18, No. 2, March 2014, ISSN 1813-7822, p (180-201).

2- Performance Enhancement of Static Var Compensator (SVC) by Modifying its Steady State Operating Point. Al-Ma’moon College Journal, ISSN 1992-4453, No. 23, 2014.

3- Effects of Percentage of Series Compensation on Subsynchronous Resonance Modes of Power System. AL-TAQANI refreed scientific journal, published by foundation of technical education. ISSN 1818-653X, vol. 27, No. 1, 2014.

 

 

6-Name:  Dr.Sahar R. Al- Sakini

  1. Fuzzy logic enhanced speed controller of senseless field orientation control induction motor drive
  2. State estimation of synchronous motor by using '' EKF, ANBAR journal fox engineering science. vol. 17 No. 7 April 2014''
  3. Monitoring power system using fuzzy logic '' engineering and development journal of engineering and development,vol.17.No.6 December 2013''.
  4. Modification Of The Distribution Transformer to Reduce The Power Losses,2016.
  5. Thermal modeling and improvement for the distribution transformer to decreases the maximum temperature,2016
  6. Design and implementation of low power thermoelectric refrigerator, 2016.

 

 

7- Name: KaremaAssiHamad

 

1-KaremaAssiHamadet al, Fluid particle flow in deeming of inertia air filter design, Al - Babylon University Journal for Engineering sciences No.1. , Vol. 10, 2010

2-KaremaAssiHamad,Numerical simulation of flow in pipe with cross jet effects, Al – Bagdad University Journal for Engineering sciences No.5. , Vol18.  , 2012

3-KaremaAssiHamad et al,Design and performance prediction of an axial flow compressor, Journal of Science and Engineering, Al _ Anabr University No.2. , Vol.5, 2012

     4-KaremaAssiHamadet al, Utilization of mixed waste in fired brick manufacturing, Engineering and Technology Journal, Scientific Journal Published by University of Technology, Baghdad /Iraq, Vol., No.2936, 2013

5- KaremaAssiHamad et al,Study of condensation temperature effect on polarization for absorption cooling system working by solar energy, Al - Babylon University Journal for Engineering sciences No.6. , Vol. 21,2014

6- KaremaAssiHamad et al, Effect of increasing fuel inlet temperature on diesel engine performance, Al – king Abdulaziz University Journal for Engineering sciences 10-9-2011.

 

  • Name: Hussein MajeedSalih

 

  • M. salih ."Numerical Simulation for Laminar Natural Convection in a Vertical Heated Channel" Engineering and Technology Journal Vol. 29, No. 11,( 2011).
  • M. salih ."Numerical Study for Natural Convection Within a Rotating Cubic Enclosure" Engineering and Technology Journal (2012).
  • M. Jalil, J. H. M. salih .and Adel H. Ayaal "Three dimensional numerical study for laminar natural convection within a rectangular solar chimney" Thiqar University Journal for Engineering Sciences (2013).
  • K. Murtadha, H. M. Salih, A. D. Salman “ Experimental study using the passive solar chimney for evaporative cooling with PCM and CFM as a thermal energy storage” Al-Khawarizmi Engineering Journal ( 2016 )
  • K. Murtadha, H. M. Salih, A. D. Salman “ Experimental and numerical study of closed loop solar chimney assisted with PCM and CFM as thermal energy storage collector” Engineering and Technology Journal ( 2016 )
  •  

 

9-Name :  Assist. Prof. Haqi Ismael Gatta

*Haqi   Ismael   Qatta"  Improvement  of  the  mechanical  and  thermal   properties  of  clay  bricks  by  using  local  materials  in  Iraq."Engineering& technology   journal,vol.30, No.19,2012.

*Haqi  Ismael  Qatta "Experimental  and  theoretical  study  of  heat  liberation of  Reciprocating  air  compressor"Engineering& technology journal  ,vol.30,  No.20,2012.

*HaqiismaelQatta"  Evaluation  of  thermal   and  mechanical   properties  of  the  bricks  "the Iraqi  journal ,Babylon, vol, 13. No,2.  2013.                                             

Khalid  salemshibib ,  karemaAssihamad&haqiismaelqatta "  Utilization  of  mixed  waste  in  fired  brick  manufacturing "  Engineering  & technology  journal, vol .32, No.5, 2014.

 

 

 

 

 

 

 

 

 

9- Name: Dr.HishamAssi Hoshi

 

  • A.A. karamallh, H. hussen, H.A.Hoshi." Experimental model of Ground-Source Heat Pump System"The Seventh Jordanian international Mechanical Engineering Conference 2011
  • F.L.Rashid, M.A.Eleiwi, H.A.Hoshi "Design Study of Nanofluid solar Absorption system" ISSN 2319-5665volume (6)Issue june-2013.
  • A.A karamallah, H.A. Hoshi. "The Effect of Pitch and Fins on Enhancement of Heat Transfer in Double Pipe Helical Heat Exchanger" ISSN 2229-5518,volume 6.Issue 10,October-2015.

 

 

10-Name: Assist. Prof.Dr.Ibtisam  Ahmed Hassan

 

 

  • Theoretical And Experimental Study Of A Forward Swept Wing. Anbar Journal For Engineering Sciences, Vol. 3, No.2, 2010
  • - Experimental Study For A Natural Convection Heat Transfer From An Isothermal Heated Rectangular Plat.Hendasa Journal,Vol.17, No.1,2011
  • - Performance Changes For Window Type Air-Conditioner Unit Chemically Treated To Work In An Industrial Petrochemical Environment , Eng. &Tecnology,Vol.17_, No.6,2011.
  • - Exact Solution Using The Tanh Method For The Natural Convection Boundary Layer Over A Vertical Flat Plate Problem

Dr. Anwar Ja’afarMohamadJawadDr. Ibtisam Ahmed Hasan   01/2011; In Proceeding   Of: Icaaa2011

  • - Thermal Characterization Of Turbulent Flow In A Tube With Discrete Coiled Wire Insert , Journal Of Engineering And Development, Vol. 18, No.6, November 2014, Issn 1813- 7822
  • - Study To Improve Heat Transfer Reduction For Exist Building’s Roof By Using Local Available Materials , Journal Of Engineering And Development, Vol. 19, No.3, May 2015, Issn 1813- 7822 

 

 

 

 

  1. Name: NASSR FADHIL HUSSEIN

 

 

  • NassrFadhil Hussein, Ali Abdulwahab Ismael, AyadKadhumKalief. “ Comparison of the thermal performance between modern packaging materials and traditional for walls of buildings in Iraq”, university of Babylon journal, 2013, Vol.(21), pp. 1450-1463.
  • NassrFadhil Hussein, “Effect of using solar energy on improving performance of compressed air energy storage systems”, 2nd Sustainable & Renewable Energy Conference November 2016, Baghdad-Iraq.
  • Nassefadhil Hussein, Ibtisam Ahmed, Ali abdulwahab, “An analytical study to statement the effect material alucobond that use in the packaging of the buildings on the cooling load”, Journal of association of Arab universities, 2015, Vol.22.
  1. Name: Assist. Prof..Dr..Hatam Kareem Kadhom Aldafai

 

-Three-Dimensional Analysis of Extrusion in Complex Die by Using Upper Bound Theory \EEng. &Tech. Journal, Vol.29, No.4, 2011.

-Mechanical Properties For Pipes Made From Composite Materials (Glass/ Epoxy And Carbon/ Epoxy) Subjected To Internal Pressure \ مجلة الهندسة والتكنولوجية, المجلد 30, العدد 6, 2012

-"Studying The Effect Of Temperature On The Diffusionof Alkaline Solution In Polyester Reinforcement By Fibersglass",The Iraqi Journal For Mechanical And Material Engineering, Vol.13, No4, 2013

-Determination Of Radial Cutting Forces During Drilling Scientific journal of construction Vol. No. 1/75,pp:152-156 Issue in Kharkov 2014.

-Numerical Analysis of Elastic Stress Due to Internal Pressure in Elbow Pipe

Elixir Mech. Engg. 83 (2015) 32968-32972

-Dr.HatamK. Kadhom2:, Studying The Effect Of Temperature On The Diffusionof Alkaline Solution In Polyester Reinforcement By Fibersglass"., The Iraqi Journal For Mechanical And Material Engineering, Vol.13, No4, 2013

-Dr.HatamK. Kadhom2", Suggestion RBFNN model for thick composite laminated plates analysis "

3457 ,16/8/2015

-Dr. Hatam Kareem Kadhom ", Construction of low –rise residential system", Vol. 30 (no 10, Year 2015)of" Ciencia e Tecnica     Vitivinicola" journal (ISSN :0254-0223).(ISI Thomson Reuters Impact factor : 0.479

-Dr.Hatam Kareem Kadhom ", DETERMINATION OF RADIAL CUTTING FORCES DURING DRILLING", Vol. 30 (no 11, Year 2015)of" Ciencia e Tecnica Vitivinicola" journal (ISSN :0254-0223).(ISI Thomson Reuters Impact factor : 0.479

 

 

 

 

 

 

 

  1. Name: Assist. Prof..Dr..Aseel Jasim Mohammed Alhassani

 

-Studying The Effect Of Temperature On The Diffusionof Alkaline Solution In Polyester Reinforcement By Fibersglass \ The Iraqi Journal For Mechanical And Material Engineering, Vol.13, No4, 2013

-Effect of laser treatment on fatigue test for composite material with presence of steel reinforcement \ The Iraqi Journal For Mechanical And Material Engineering,  : number of the book 3344 in   23/4/2015

-Dr.Aseel Jasim Mohammed ", Effect of laser treatment on fatigue test for composite material with presence of steel reinforcement", The Iraqi Journal For Mechanical And Material Engineering, 32/4/2015.

- Dr.Aseel Jasim Mohammed & Dr. Hatam Kareem Kadhom Study the Importance of Calculating the Parital Volume Fraction tp the composite Material reinforced with glass and Carbon Fibers, Journal of University of Techgnology, 2011.

 

 

  1. Name: Israa Saad Ahmed

 

  • Mahmmod, IsraaSaad , S. Abaas, “Natural convection heat transfer in rectangular enclosure with sinusoidal boundary condition”, engineering and development journal, Sep. 2011.
  • Daood, IsraaSaad, “ a study for the influence of change in ratio of cross sectional area to constant perimeter of thermosyphon condenser”, Eng. And Technology Journal, Nov. 2011.
  • IsraaSaad , “Numerical Study for laminar Natural convection heat transfer in squar enclosure with effect of partially heated ”, the Iraqi journal for Mechanical-and Material engineering, Dec. 2011.
  • Wahid S. Mohammed, .Israa S. Ahmed, “Experimental Study on Full Visualization and Startup Performance of an Oscillating Heat Pipe”, Advances in Natural and Applied Sciences, January issue 2016.
  • Wahid S. Mohammed, .Israa S. Ahmed, “Numerical Simulation of Oscillating Heat Pipe Using VOF Model", Australian Journal of Basic and Applied Sciences, 10(14) September 2016, Pages: 196-206.

Wahid S. Mohammed, .Israa S. Ahmed, "Experimental Investigation to the Parameters Effect the Performance of Oscillating Heat Pipe", Journal of Applied Sciences Research, October, 2016.

Mahmood, S. Sharef, IsraaSaad , “ a computational study of laminar natural convection heat transfer in annular enclosure” Wasit University, Dec. 2011.

 

 

 

Name: Assist.Prof. Dr. Hussain Abdulaziz Abrahem

  

1-Abdulaziz Hussain, Al-alkawi H. J. “An Appraisal of Euler and Johnson Buckling theories under dynamic compression buckling loading”, the Iraqi Journal for Mechanical and Material Engineering, Vol.7, № 2, p.p.108-115 ,Iraq, 2007.

2-Serazutdinov M.N., Ubaidulloev M.N., Abrahem H.A.” Calculation of  loaded strengthened structure using variational methods “ Izv. Vuz. Building construction Stroitelstvo, № 7, pp.118-123, Russia, 2010. (in Russian copy)

 3-Serazutdinov  M.N., Abrahem H.A. “ Load-carrying capacity of element beam structure, strengthened in a stressed state “  Vestnik. Kazan State Technological University., Kazan, № 9, pp. 512-518, Russia, 2010. (in Russian copy)

4-Serazutdinov M.N., Ubaidulloev M.N., Abrahem H.A. “ Effect of mounting force in the load-carrying capacity of the strengthened beam systems”  “  Vestnik. Kazan State Technological University, Kazan,  № 10, pp. 116-124, Russia, 2011. (in Russian copy)

5-Serazutdinov M.N., Ubaidulloev M.N., Abrahem H.A. “ Increasing the load carrying capacity of the loaded strengthened structure “Structural Mechanics of engineering structures and buildings, № 3, pp. 23-30, Russia, 2011. (in Russian copy)

6-Serazutdinov M.N., Abrahem H.A. “ Determination of forces required for the convergence of the beams in the strengthening structure simulation”  News KGASU.( Kazan State Architecture and Civil Engineering), № 3 (17), S. 188-193, Russia, 2011. (in Russian copy)

7-Abrahem H.A., Enaam O. H.” A variation method in simulation  of the slow moving concentrated mass on truss structures “ The Iraqi Journal For Mechanical And Material Engineering, Babylon University, Vol.15, No1, pp.1-11, Iraq, 2015.

8-Abrahem H.A.” The limited pressure model in a thin-walled circular plate, based on a mathematical model with limited plastic deformation “ Thi-Qar University  Journal For Engineering Sciences, Thi-Qar University, Vol.?, No?,  pp.?-? , Iraq, 201?.. ( waiting for publishing ).

 9-Serazutdinov M.N., Ubaidulloev M.N., Abrahem H.A. “ Calculation of the strengthened beam systems by variation methods “  BEM & FEM-2009. Proceedings of the 23rd International Conference "Mathematical Modeling in Mechanics of Deformable Bodies and Structures: Methods of Boundary and Finite Elements." September 28 – October 01, 2009. – St. Petersburg: Research Center "Morintekh". – Vol. 2, pp. 410-415, Russia, 2009. (in Russian copy)

10-Serazutdinov M.N., Ubaidulloev M.N., Abrahem H.A. “ A variation method for determining the load-carrying capacity of the strengthened structures “ Proceedings of the 2nd International Conference "Problems in Nonlinear Mechanics of Deformable Solids" (Kazan, 8-11 December, 2009), Izd. Kaz. Gos. Univ., pp. 337-339, Russia, 2009. (in Russian copy)

11-Serazutdinov M.N., Ubaidulloev M.N., Abrahem H.A. “ A variation method of beam systems calculation under plastic deformation“Proceedings of the International Scientific and Technical Educational Conference "Education and Science for Production."  ( Naberezhnye Chelny, 28-31 March, 2010),  Part 1,  Book 1. – Kamskaya Gos. Inzh. Ekon. Akad., pp. 43-46, Russia, 2010. (in Russian copy)

12-Abrahem H.A. “ A numerical calculation method for  a pre-stressed beam system ” Proceedings of the international youth conference on natural sciences and technical disciplines (Yoshkar-Ola, 16-17 April, 2010), Part 3. – pp. 128-129, Russia, 2010. (in Russian copy)

13-Abrahem H.A., Serazutdinov M.N.” Calculation of load-carrying capacity of beam structures strengthened in a stressed state” The Iraqi Journal of Mechanics and Materials. The 3rd Annual Scientific Conference of the Faculty of Engineering, Babylon University, Code: ME 1.), Iraq, 2011.

14-Abrahem H.A.“ New Internal Pressure Model for ABS Thin Cylindrical Shell Under Divided Walled Shell Consideration and Plasticity Condition” The 2nd  International Scientific Conference for Engineering and Agriculture Sciences (27-28 may 2015 ), Al-Furat Al-Awsat Technical University, Al-Mussaib Technical collage, Iraq,  pp. 64-76, 2015.

 

  • .Name: Assist. Prof.Dr. Talib zghayer Farge AL_Baidhani

 

  • Z. FARGE, I. I. SHIBIB, M. A. FAYAD, M. A. ALWAN, “Performance Improvement of a Turboshaft Engine Using Water Injection”, the Iraqi Journal for Mechanical-and Materials Engineering, Vol. 11, No. 3, 2011.
  • Z. FARGE, experimental study the effect of absorbing tube diameter on performance of compound parabolic concentrator solar collector", Engineering and Development Jornal", 26/1/2016

 

 

 

 

 

Name: Assist. Prof.Dr. Khalid Faisal . Sultan

 

 

 

 

 

 

1

Experimental Investigation of Heat Transfer

and Flow of Nano Fluids in Horizontal Circular Tube

International Journal of Mechanical and Aerospace Engineering 6, 2012

2

Numerical Assessment of Heat Transfer and Flow of Nano fluids in Horizontal and inclined circular tube

Engineering Conference of Comprehensive Research Theses, Special Issue of Engineering and Development Journal ISSN 1813 – 7822, May 12 – 5 – 2012

 

3

Experimental Investigation of Thermal Conductivity and Pressure Drop for Water – Nano fluid Mixture

 

Accepted for Contribute into The Iraqi Journal For Mechanical and Material Engineering, University of Babylon  No.3 , Vol. 13, 2013

 

4

Numerical Estimation of mixed Convection

Heat Transfer of Nannofluids flowing in

horizontal and an Inclined Concentric

Annuli

 

Engineering and development journal

College of Engineering University of Al – Mustansiriya , Baghdad/Iraq, No 6. , Vol. 17, March 26 – 3 – 2013

 

5

Numerical Assessment of Thermal Energy and

Flow  of Nano fluids in a Horizontal and an

Inclined Tube Filled with a Porous Medium

 

Accepted for Contribute into Nation Renewable Energies Conference and Their Application, Engineering and Technology Journal, Scientific Journal Published by University of Technology, Baghdad /Iraq, January 17 – 1 – 2013

 

6

Experimental investigation of heat transfer enhancement and flow of spiral coil heat exchanger for Ag, Cu and ZrO2  Nano fluids

 

International Journal on Heat and Mass Transfer - Theory and Applications (IREHEAT), Vol. 1, N. 3 ISSN 2281 - 8537 June 8 – 6 – 2013

Praise Worthy Prize S.r.l.

 

7

Numerical solution of Heat Transfer and

Flow of Nano fluids in Annulus with Fins

Attached on the Inner Cylinder

 

Al - Babylon University Journal for Engineering sciences No.6. , Vol. 22 , December  15 – 12 – 2013

 

8

Experimental investigation of heat transfer enhancement with Cu, Fe2O3  ethylene glycol distilled water Nano fluid in horizontal tube

 

International Journal on Heat and Mass Transfer - Theory and Applications (IREHEAT), Vol. 1, N. 3 ISSN 2281 – 8537, June 8 – 6 – 2013

Praise Worthy Prize S.r.l.

9

Experimental investigation of heat transfer enhancement with Ag , TiO2ethylene glycol distilled water Nano fluid in horizontal tube

The 4th International conference for nanotechnology and advanced materials and their applications ICNAMA,  Engineering and Technology Journal University of Technology

,September 23 – 9 – 2013

10

Experimental Analysis of Heat Transfer Enhancement and flow with Cu ,TiO2 Ethylene Glycol Distilled Water Nanofluid In spiral coil heat exchanger 

Accepted for Contribute into Tikrit University Journal of engineering science

March 10 – 3 – 2014

 

11

Study the Effect of variable  Base Fluid (DW and EG) Physical Properties of Nanofluids Containing Cu, Al and Zr2O3 Nanoparticles

 

AL – Qadisiyia University Journal of engineering, No.1. , Vol. 7 January 19 -1- 2014

12

A comparative study of the thermal conductivity on particles of zirconium oxide (Zr2O3) and silver (Ag) in micro and nanofluids

AL – Qadisiyia University Journal of engineering, No.2. , Vol. 7 ,March 16 – 3 – 2014

13

Effect of hole space ratio on effusion cooling performance

Thi _ Qar  university journal for engineering sciences, No.1. vol.6.,2015

14

Experimental  analysis on thermal efficiency of evacuated tube solar collector by using Ag and ZrO2nanofluids

 

International Journal of Renewable and Sustainable Energy Published online 4(16):19 -28, 23 November 2014

15

Experimental  evaluation of the thermal performance in the  solar nanofluid heating system by using cupper and titanium oxide

 

The Iraqi Journal For Mechanical and Material Engineering, University of Babylon No. , Vol.    16 – 12 – 2014.

16

Numerical appraisal of  heat transfer and flow in concentric annuli permeable and impermeable fins by using Nanofluids

International Journal of engineering sciences and research technology vol.3, issue.12, December, 2014.

 

17

Intensification of Heat Transfer and flow in heat exchanger with shell and helically coiled tube by using nanofluid

International Journal of engineering sciences and research technology vol.4, Issue.1, 4(1) January, 2015.

18

Augmentation of Heat Transfer Through

Heat Exchanger With and Without Fins by

 Using Nano fluids

 

Engineering and development journal

College of Engineering University of Al – Mustansiriya , Baghdad/Iraq, No.4 , Vol.19 ,

July 2015, ISSN 1813- 7822

19

Augmentation of Heat Transfer for spiral coil heat exchanger in solar energy systems by using nanofluids

Eng. &VEngineering and Technology Journal  No.9 , Vol.33 , 2015, University of Technology Vol. 33Part (B), No.6,

20

Experimental Study of Heat Transfer Enhancement in Car Radiator by Using copper and aluminum Nanofluids

VEngineering and Technology Journal  No.6 , Vol.33 , part(B),2015, University of Technology

21

Experimental Study of Heat Transfer

 Enhancement for  spiral coil heat

exchanger by using hybrid nanofluid

in solar collector

Wulfenia Journal Vol.22 , No.12 , Dec 2015.

 

 

 

 

dept.Library                Legal Unit             Committees              Quality Divisi

We have 78 guests and no members online

Top